The Wittke Featherweight

The Wittke Featherweight is our optimized weight front loader designed to maximize the legal payload of your residential & recycling routes. The Featherweight is low weight but it’s built strong. Its body has been engineered to withstand the same daily abuses as our heavy duty front loaders. And it’s boasting the same hydraulics and the same 10,000 lbs load rated arms as our Starlight and Superduty.

The Wittke Featherweight

  •  
    A

    Features

    Wittke Featherweight

     
    Wittke Featherweight

     
     


     

     

     

  •  
    B

    Specifications

    Wittke Featherweight

     

     BODY DIMENSIONS

    32yd³
    (30+2)

    34yd³
    (30+4)

    36yd³
    (30+6)

    36yd³
    (34+2)

    38yd³
    (34+4)

    40yd³
    (34+6)

    40yd³
    (38+2)

    42yd³
    (38+4)

    44yd³
    (38+6)

    Overall Length with Arms Stowed. Tailgate Closed (in.) 245 260 275 269 284 299 296 311 326
    Overall Width (in.) 102 102 102 102 102 102 102 102 102
    Overall Height Above Frame with Arms Stowed. Tailgate Closed (in.) 118 118 118 118 118 118 118 118 118
    Overall Length with Arms Stowed. Tailgate Open (in.) 308 308 308 331 331 331 358 358 358
    Overall Height Above Frame with Arms Stowed. Tailgate Open (in.) 178 178 178 178 178 178 178 178 178
    Overall Length With Arms/Forks Down. Tailgate Closed (in.) 414 429 444 438 453 468 465 480 495

     BODY SPECIFICATIONS

     

    Body Floor 0.157" AR450 175,000psi
    Body Sides 0.118" 100 XF 100,000psi
    Body Roof 12ga A1011 80,000psi
    Tailgate 12ga A1011 80,000psi

     HOPPER SPECIFICATIONS

     
    Hopper Size (yd³) 12
    Hopper Width 80" 
    Hopper Floor 3/16" AR450 175,000psi
    Hopper Sides (upper) 0.118" 100 XF 100,000psi
    Hopper Sides (lower) 0.157" AR450 175,000psi

     FORKS SPECIFICATIONS

     

    Forks Thickness 1" Weldox 700 100,000psi

     ARM SPECIFICATIONS

     

    Arm Construction 10,000 lbs load rated arms
    Arm Thickness 4"
    Arm Side Plates 1/4" 100 XF 100,000psi
    Arm Lifting Capacity 8,000 lbs

     PACKER SPECIFICATIONS

     

    Compaction ratio (lbs/yd³ ) 600
    Packer Panel Lower Face Plate 3/16"  AR450 175,000psi
    Packer Panel Upper Face Plate 0.157" AR450 175,000psi
    Bottom Packer Wear Shoes 3/8" AR450 175,000psi (Chromium optional) 

     HYDRAULICS

     

    Pump Make & Model Muncie Live Pak (gear)
    Pump Capacity 60 gpm @ 1500 rpm
    Max. Operating Pressure 2,500 psi
    Oil Reservoir 74 gal

     CYLINDERS

     

    Packer Cylinders (30yd³ bodies) 3 stages 5-1/2" bore x 133-9/16" stroke
    Packer Cylinders (34yd³ bodies) 3 stages 5-1/2" bore x 167-13/16" stroke
    Packer Cylinders (38yd³ bodies) 3 stages 5-1/2" bore x 181-1/2" stroke
    Arm Cylinders (8,000 lbs Lifting capacity) 4-1/2" bore x 2" rod x 45-3/8" stroke
    Fork Cylinders 3-1/2" bore x 1-3/4" rod x 18-7/8" stroke
    Tailgate Cylinders 2-1/2" bore x 1-3/4" rod x 39" stroke
    Top Door Cylinder 2-1/2" bore x 1-1/2" rod x 92" stroke
     

     

     Note: Specifications subject to changes without notice

       
       
  •  
    C

    A CLEANER WAY OF DOING BUSINESS

    CNG Ready since 2001

     
    With the high volatility of diesel prices, fuel choice has never been more important. At Labrie, we believe in greener, safer, smarter and more efficient waste collection vehicles. This is what we have been designing and building for the past 25 years. We deliver the highest-quality, factory–installed compressed natural gas (CNG) solutions that are fully tested at our on-site CNG station. Our manufacturing expertise in CNG is passed along to you with every vehicle. You benefit from a trusted source of expertise when it comes to converting to CNG.

     

     

    THE BENEFITS OF CHOOSING CNG ARE HUGE:

    • AFFORDABLE : Substantially reduced fuel costs when compared to diesel
    • CLEAN: 23% less Greenhouse Gas Emissions compared to diesel fuel
    • FOREIGN FUEL INDEPENDENCE: 98% of fuel supplied from the U.S. and Canada
    • QUIET: 10 decibels more quiet than a diesel truck

    LABRIE CNG SIMPLE, RELIABLE AND PRODUCTIVE

    • Behind the cab design built to hold 4 or 5 CNG tanks, 66 or 81 DGE
    • Low height, integrated body shape, roof mounted design. 4 or 5 tanks, 60 to 75 DGE
    • Premium design having low impact on legal payload

     

    CNG Ready Trucks



     

     

     

     

     

  •  
    D

    Brochure & Media

    Wittke™ Featherweight

     

    For more information on the Wittke™ Featherweight

     

     

    Adobe PDF Specifications Sheet
    Adobe PDF CNG Specifications
  •  
    E

    Dealers & Demos

    Call us for more info

     

    Dealers in the US

    Distributors in the US


    In Canada

    Distributors in Canada


    International

    International Distributor;

    General Sales & Demos

    Sales
    Sales - Phone 1-800-463-6638
    Sales - Phone 1-418-831-8250
    Sales - Fax 1-418-831-5255
    Sales - Email Contact our Regional Sales Managers to get a quote on a Labrie Enviroquip Truck or help you locate a Distributor near you. 

    Demo Program
    Sales - Phone 1-920.232.7510
    Demos - Email Contact us for more information on our Demos
       
     

Find a Sales Rep

Click to find and contact one of our Sales Representatives.   Find a Sales Rep

Request a Quote

If you wish to request a quote to get pricing on a Labrie, Leach or Wittke truck, please use our Online Quote Request form   Request a Quote

Request Information

Thank you for your interest in Labrie Enviroquip Group Products. For more information, you may complete our Request Information Form.   Request information