Automizer Transformer

The Automizer Transformer Side Loader

If you have the occasional need for manual collection, or are planning to transition to fully automated collection, but need an immediate solution, the Automizer Transformer has got you covered. With it’s big 0.5 yd³ loading bucket, you can collect loose bags, bulky or overlooked items, without having to buy a separate truck. And when you’re ready for fully automated collection, you can easily change the bucket to the helping hand grabber, supplied with the truck.

The Automizer Transformer is truly an all in one solution for all your pickup needs.

Automizer Transformer

  •  
    A

    Features

    Labrie Automizer Transformer 

    Automizer Transformer
     
  •  
    B

    Specifications

    Automizer Transformer

     
    BODY DIMENSIONS 20 (20+0) 22 (20+2) 24 (20+4) 27 (27+0) 29 (27+2) 31 (27+4) 33 (27+6) 31 (31+0) 33 (31+2) 35 (31+4) 37 (31+6)
    Overall Width (in.) 96 96 96 96 96 96 96 96 96 96 96
    Overall Length, Tailgate Closed  (in.) 232 239 254 272 279 294 309 303 310 325 340
    Overall height above frame, Tailgate Closed  (in.) 103 103 103 103 103 103 103 103 103 103 103
    Overall height above frame, Tailgate Opened  (in.) 192 192 192 192 192 192 192 192 192 192 192
    Overall height above frame, dumping position (in.) 209 209 209 236 236 236 236 249 249 249 249
    BODY SPECIFICATIONS
    Body Floor 0.157 in. Hardox 450 175,000psi
    Body Sides (lower) 10ga A1011 80,000psi
    Body Roof 12ga A1011 80,000psi
    Tailgate 12ga A1011 80,000psi
    HOPPER SPECIFICATIONS
    Hopper Size (cu.yd.) 6,5
    Hopper Floor 1/4 in. Hardox 450 175,000psi
    Hopper Sides (lower) 1/4 in. Hardox 450 175,000psi
    ARM SPECIFICATIONS
    Bucket Size (cu.yd.) 0,5
    Arm Lift Capacity 400 lbs
    Arm Reach 84 in. (120 in. optional)
    Arm Cycle Time 8 sec @ 0 in. reach; 18 sec @ 84 in. reach
    Arm Controls Proportional joystick, electric over hydraulic
    PACKER SPECIFICATIONS
    Packer Panel Cycle Time 12 sec @ 1200 rpm
    Packer Panel Face Plate 1/4 in. 100QT 100,000psi
    Packer width 70 in.
    Packer height 16 in.
    Packer stroke 52 in.
    HYDRAULIC SPECIFICATIONS
    Pump Make&Model Dual Vane
    Pump Capacity BODY: 20 gpm@700 rpm; ARM: 16 gpm@700 rpm
    Max. Operating Pressure 3,000 psi
    Oil Reservoir (cab over) 85 gal
    CYLINDERS SPECIFICATIONS
    Body lifting Cylinder (20 yd³ bodies) 4 stages 6-1/2 in. bore x 150 in. stroke
    Body lifting Cylinder (27 yd³ bodies) 5 stages 6-1/2 in. bore x 180 in. stroke
    Body lifting Cylinder (31 yd³ bodies) 6 stages 6-1/2 in. bore x 204 in. stroke
    Packer Cylinders 4 in. bore x 2-1/2 in. rod x 40 in. stroke
    Tailgate Cylinders 2-1/2 in. bore x 1-3/4 in. rod x 39 in. stroke
    Arm extension Cylinder 2 in. bore x 1-1/4 in. rod x 70 in. stroke
    Lifting Cylinder 3 in. bore x 1-1/2 in. rod x 16 in. stroke
    Grabber Cylinder 1-1/2 in. bore x 1 in. rod x 6-1/4 in. stroke

     

  •  
    C

    A CLEANER WAY OF DOING BUSINESS

    CNG Ready since 2001

     
    With the high volatility of diesel prices, fuel choice has never been more important. At Labrie, we believe in greener, safer, smarter and more efficient waste collection vehicles. This is what we have been designing and building for the past 25 years. We deliver the highest-quality, factory–installed compressed natural gas (CNG) solutions that are fully tested at our on-site CNG station. Our manufacturing expertise in CNG is passed along to you with every vehicle. You benefit from a trusted source of expertise when it comes to converting to CNG.

     

     

    THE BENEFITS OF CHOOSING CNG ARE HUGE:

    • AFFORDABLE : Substantially reduced fuel costs when compared to diesel
    • CLEAN: 23% less Greenhouse Gas Emissions compared to diesel fuel
    • FOREIGN FUEL INDEPENDENCE: 98% of fuel supplied from the U.S. and Canada
    • QUIET: 10 decibels more quiet than a diesel truck

    LABRIE CNG SIMPLE, RELIABLE AND PRODUCTIVE

    • Behind the cab design built to hold 4 or 5 CNG tanks, 66 or 81 DGE
    • Low height, integrated body shape, roof mounted design. 4 or 5 tanks, 60 to 75 DGE
    • Premium design having low impact on legal payload

     

    CNG Ready Trucks



     

     

     

     

     

  •  
    D

    Brochure & Media

    Automizer Transformer

     

    For more information on the Automizer Transformer

     

     

    Adobe PDF Download our Product Brochure
    Youtube Visit our Youtube Channel
  •  
    E

    Dealers & Demos

    Call us for more info

     

    Dealers in the US

    Distributors in the US


    In Canada

    Distributors in Canada


    International

    International Distributor;

    General Sales & Demos

    Sales
    Sales - Phone 1-800-463-6638
    Sales - Phone 1-418-831-8250
    Sales - Fax 1-418-831-5255
    Sales - Email Contact our Regional Sales Managers to get a quote on a Labrie Enviroquip Truck or help you locate a Distributor near you. 

    Demo Program
    Sales - Phone 1-920.232.7510
    Demos - Email Contact us for more information on our Demos
       
     

Menu.

Home

Our Trucks

If Your Route Is

Our Certified Dealers

Parts & Service

About Labrie

Contact Us

Latest News

Find a Sales Rep

Click to find and contact one of our Sales Representatives.   Find a Sales Rep

Request a Quote

If you wish to request a quote to get pricing on a Labrie, Leach or Wittke truck, please use our Online Quote Request form   Request a Quote

Request Information

Thank you for your interest in Labrie Enviroquip Group Products. For more information, you may complete our Request Information Form.   Request information