PCO-cv

The PCO-cv

The PCO-cv bears all of the great features and benefits of our Wittke™ front loader.

Built fast and tough; with its smooth lifting arm operation, quick cycle times and auto-latch tailgate, coupled with the following key features makes it the perfect solution for commercial organics collection.

PCO-cv Organics

  •  
    A

    PCO-cv FRONT LOADER

    COMMERCIAL ORGANICS COLLECTION: SAFE, SIMPLE, OPTIMUM

     

    PCO-cv Pendulum

    PCO-cv Features 

     

  •  
    B

    Specifications

    Wittke PCO-cv

     
     

    BODY DIMENSIONS

    37 cu. yd ( 28.3 cu. m)

    Overall Length (Arms/Forks Up, Travel Position) 300" (7,620 mm)
    Overall Length (Arms/Forks Down) 474 " (12,040 mm)
    Overall Height Above Chassis (Arms/Forks Up, Travel Position) 118" (2,997 mm)
    Overall Width 36-7/16" (925 mm)
    Tailgate Length (4 cu. yd.) 100" (2,540mm)
    Hopper Opening Length 79-1/4" (2,013 mm)
    Hopper Opening Width 349-1/4" (8,871 mm)
    Overall Length (Tailgate Raised, Arms/Forks Up, Travel Position) 518" (13,517 mm)
    Overall Length (Tailgate Raised, Arms/Forks Down) 176-13/16" (4,491 mm)
    Overall Height Above Chassis (Tailgate Raised, Arms/Forks Up, Travel Position) 176-13/16" (4,491mm)
    Overall Height Above Chassis (Arms/Forks Down) 109-1/2" (2,781 mm)
    Overall Height Above Chassis (Arms/Forks Down) 109-1/2" (2,781 mm)
       

    BODY CONSTRUCTION

     
    Body Walls (Curved One Piece) 1/8" (3.2 mm) - 80,000 psi or better
    Body Roof (Curved One Piece) 1/8" (3.2 mm) - 80,000 psi or better
    Body Floor (Curved One Piece) 0,156" (4.0 mm) - 80,000 psi or better
    Canope 12 GA - 50,000 psi
    Body Total Capacities (Tailgate & Hopper Included) 37, 39 cu. yd.
       

    HOPPER CONSTRUCTION

     
    Hopper Floor (Flat One Piece) 3/16" (4.8 mm) - 80,000 psi or better
    Hopper Walls (Curved One Piece) 0,156" (4.0 mm) - 80,000 psi or better
    Top Door 14 GA - 50,000 psi
       

    PACKER CONSTRUCTION

     
    Type Pendulum
    Face Plate 5/16" (7.9 mm) - 80,000 psi or better
       

    TAILGATE SPECIFICATIONS

     
    Curved Face 1/8" (3.2 mm) - 80,000 psi or better
    Slide-In Rubber Seal Height (Seal on tailgate, Not on Body, No Tailgate Vertical Move Open or Close) 89" (2,260 mm) - STD
    Latches Hydraulic latches on both sides
    Tailgate Capacities 4 & 6 yd³
       

    ARM

     
    Steel 1/4" (6.4 mm) & 1/2", (12.7 mm) - 100,000 psi
    Lifting Capacity 10,000 lbs
       

    HYDRAULICS

     
    Operating Pressure 2,500 psi
    STD Pump Gear Type 54 GPM @ 1500 RPM
    Directional Valve Parker, 5 Sections with Air Actuator
    Packer Controls In Cab STD Packer Controls
    Arms/Forks Controls In Cab STD Twinstick (Joystick optional)
    Hydraulic Tank Capacity Aluminum, chassis mount, 60 Gallons
    Return Filter In Tank Return Filter
    Oil Level Gauge Mounted on Tank
       

    CYLINDERS

     
    Packer 5" (127 mm)
    Body Lifting 6-1/2" x 5-1/2" x 4-1/2" x 3-1/2"
    Top Door 2-1/2" Bore
    Forks 3-1/2" Bore
    Arms 4-1/2" Bore
    Tailgate 2-1/2" Bore
       



  •  
    C

    A CLEANER WAY OF DOING BUSINESS

    CNG Ready since 2001

     
    With the high volatility of diesel prices, fuel choice has never been more important. At Labrie, we believe in greener, safer, smarter and more efficient waste collection vehicles. This is what we have been designing and building for the past 25 years. We deliver the highest-quality, factory–installed compressed natural gas (CNG) solutions that are fully tested at our on-site CNG station. Our manufacturing expertise in CNG is passed along to you with every vehicle. You benefit from a trusted source of expertise when it comes to converting to CNG.

     

     

    THE BENEFITS OF CHOOSING CNG ARE HUGE:

    • AFFORDABLE : Substantially reduced fuel costs when compared to diesel
    • CLEAN: 23% less Greenhouse Gas Emissions compared to diesel fuel
    • FOREIGN FUEL INDEPENDENCE: 98% of fuel supplied from the U.S. and Canada
    • QUIET: 10 decibels more quiet than a diesel truck

    LABRIE CNG SIMPLE, RELIABLE AND PRODUCTIVE

    • Low height, integrated body shape, roof mounted design. 4 or 5 tanks, 60 to 75 DGE
    • Premium design having low impact on legal payload

     

    CNG Ready Trucks



     

     

     

     

     

  •  
    D

    Brochure & Media

    PCO-cv Organics Front Loader

     

    For more information on the PCO-cv Organics Collection

     

     

    Video       PCO-cv Product Video

    Adobe PDF Download our Product Brochure
    Youtube Visit our Youtube Channel
  •  
    E

    Dealers & Demos

    Call us for more info

     

    Dealers in the US

    Distributors in the US


    In Canada

    Distributors in Canada


    International

    International Distributor;

    General Sales & Demos

    Sales
    Sales - Phone 1-800-463-6638
    Sales - Phone 1-418-831-8250
    Sales - Fax 1-418-831-5255
    Sales - Email Contact our Regional Sales Managers to get a quote on a Labrie Enviroquip Truck or help you locate a Distributor near you. 

    Demo Program
    Sales - Phone 1-920.232.7510
    Demos - Email Contact us for more information on our Demos
       
     

Menu.

Home

Our Trucks

If Your Route Is

Our Certified Dealers

Parts & Service

About Labrie

Contact Us

Latest News

Find a Sales Rep

Click to find and contact one of our Sales Representatives.   Find a Sales Rep

Request a Quote

If you wish to request a quote to get pricing on a Labrie, Leach or Wittke truck, please use our Online Quote Request form   Request a Quote

Request Information

Thank you for your interest in Labrie Enviroquip Group Products. For more information, you may complete our Request Information Form.   Request information