Starlight, Superduty

The Starlight & The Superduty

The Wittke Starlight is known for its agility. Its low body weight maximizes the legal payload capacity and its fast lifting cycle ensures rapid loading on the route. The Starlight tackles both residential and commercial routes with ease and with its low body weight, you will be able to collect more material, providing the highest legal payload ever on each collection.

The Wittke Superduty is as rugged as they get. The 100% Hardox steel body delivers ultimate strength at the lowest possible body weight. The Wittke Superduty is the toughest of all front loaders; engineered to require nominal maintenance and providing the lowest total cost of ownership.


The Wittke Series

  •  
    A

    Features

    Wittke™ Starlight & Superduty

     
    Wittke Features
     
  •  
    B

    Specifications

    Wittke Starlight & Superduty

     
     

    BODY DIMENSIONS

    40 cu. yd. (31 m3 )

    Overall Length (Arms/Forks Up, Travel Position) 292-3/16" (7,422 mm)
    Overall Length (Arms/Forks Down) 461" (11,709 mm)
    Overall Height Above Chassis (Arms/Forks Up, Travel Position) 118" (2,997 mm)
    Overall Width 101" (2,565 mm)
    Tailgate Length 49-7/16" (1256 mm)
    Hopper Opening Length 91" (2,311 mm)
    Hopper Opening Width 80" (2,032 mm)
    Overall Length (Tailgate Raised, Arms/Forks Up, Travel Position) 322-1/4" (8,185 mm)
    Overall Length (Tailgate Raised, Arms/Forks Down) 491" (12,471 mm)
    Hopper Access Door Height 36-13/16" (935 mm)
    Hopper Access Door Width 26-7/16" (672 mm)
    Overall Height Above Chassis (Tailgate Raised, Arms/Forks Up, Travel Position) 176-13/16" (4,491 mm)
    Overall Height Above Chassis (Arms/Forks Down) 109-1/2" (2,781 mm)
       

    BODY CONSTRUCTION

    Starlight

    Superduty

    Body Walls (Curved One Piece) 1/8" (3.2 mm) 175,000 psi
    (Hardox 450)
    0,156" (4.0 mm) 175,000 psi
    (Hardox 450)
    Body Roof (Curved One Piece) 1/8" (3.2 mm) 175,000 psi
    (Hardox 450)
    0,156" (4.0 mm) 175,000 psi
    (Hardox 450)
    Body Floor (Curved One Piece) 0,156" (4.0 mm) 175,000 psi
    (Hardox 450)
    3/16" (4.8 mm) 175,000 psi
    (Hardox 450)
    Body Total Capacities (Tailgate & Hopper Included) 12 GA 50,000 psi 12 GA 50,000 psi
      32, 34, 36, 38, 40, 42 & 44 yd³ 38, 40, 42 & 44 yd³

    HOPPER CONSTRUCTION

    Starlight

    Superduty

    Hopper Floor (Flat One Piece) 3/16" (4.8 mm) 175,000 psi
    (Hardox 450)
    1/4" (6.4 mm) 175,000 psi
    (Hardox 450)
    Hopper Walls (Curved One Piece) 0,156" (4.0 mm) 175,000 psi
    (Hardox 450)
    3/16" (4.8 mm) 175,000 psi
    (Hardox 450)
    Access Door (Hinged with upper & lower locks) 0,156" (4.0 mm) 175,000 psi
    (Hardox 450)
    3/16" (4.8 mm) 175,000 psi
    (Hardox 450)
    Top Door 14 GA STD
    (10 GA optional)
    50,000 psi 14 GA STD
    (10 GA optional)
    50,000 psi
         

    PACKER CONSTRUCTION

    Starlight

    Superduty

    Type Full Eject
    Upper Face Plate (One Piece) 0,156" (4.0 mm) 175,000 psi
    (Hardox 450)
    0,156" (4.0 mm) 175,000 psi
    (Hardox 450)
    Lower Face Plate 1/4" (6.4 mm) 175,000 psi
    (Hardox 450)
    1/4" (6.4 mm) 175,000 psi
    (Hardox 450)
         

    TAILGATE CONSTRUCTION

    Starlight

    Superduty

    Curved Face 1/8" (3.2 mm) 175,000 psi
    (Hardox 450)
    0,156" (4.0 mm) 175,000 psi
    (Hardox 450)
    Slide-In Rubber Seal Height (Seal on tailgate, Not on Body, No Tailgate Vertical Move Open or Close) 37" (940.0 mm) STD 37" (940.0 mm) STD
    Latches Hydraulic latches on both sides Hydraulic latches on both sides
    Tailgate Capacities 2, 4 & 6 yd³ 2, 4 & 6 yd³
         

    HYDRAULICS

    Starlight

    Superduty

    Operating Pressure 2,500 psi 2,750 psi
    STD Pump Gear Type 54 GPM @ 1500 RPM Gear Type 54 GPM @ 1500 RPM
    Directional Valve Parker, 5 Sections with Air Actuator Parker, 5 Sections with Air Actuator
    Packer Controls In Cab STD Packer Controls (Stop, Pack, Retract & Eject) In Cab STD Packer Controls (Stop, Pack, Retract & Eject)
    Arms/Forks Controls In Cab STD Twinstick (Joystick optional) In Cab STD Twinstick (Joystick optional)
    Hydraulic Tank Capacity Aluminum, chassis mount, 60 Gallons Aluminum, chassis mount, 60 Gallons
    Return Filter In Tank Return Filter In Tank Return Filter
    Oil Level Gauge Mounted on Tank Mounted on Tank
         



  •  
    C

    A CLEANER WAY OF DOING BUSINESS

    CNG Ready since 2001

     
    With the high volatility of diesel prices, fuel choice has never been more important. At Labrie, we believe in greener, safer, smarter and more efficient waste collection vehicles. This is what we have been designing and building for the past 25 years. We deliver the highest-quality, factory–installed compressed natural gas (CNG) solutions that are fully tested at our on-site CNG station. Our manufacturing expertise in CNG is passed along to you with every vehicle. You benefit from a trusted source of expertise when it comes to converting to CNG.

     

     

    THE BENEFITS OF CHOOSING CNG ARE HUGE:

    • AFFORDABLE : Substantially reduced fuel costs when compared to diesel
    • CLEAN: 23% less Greenhouse Gas Emissions compared to diesel fuel
    • FOREIGN FUEL INDEPENDENCE: 98% of fuel supplied from the U.S. and Canada
    • QUIET: 10 decibels more quiet than a diesel truck

    LABRIE CNG SIMPLE, RELIABLE AND PRODUCTIVE

    • Low height, integrated body shape, roof mounted design. 4 or 5 tanks, 60 to 75 DGE
    • Premium design having low impact on legal payload

     

    CNG Ready Trucks



     

     

     

     

     

  •  
    D

    Brochure & Media

    Wittke™ Starlight & Superduty

     

    For more information on the Wittke™ Front Loaders

     

     

    Adobe PDF Download our Starlight & Superduty Brochure
    Youtube Visit our Youtube Channel
  •  
    E

    Dealers & Demos

    Call us for more info

     

    Dealers in the US

    Distributors in the US


    In Canada

    Distributors in Canada


    International

    International Distributor;

    General Sales & Demos

    Sales
    Sales - Phone 1-800-463-6638
    Sales - Phone 1-418-831-8250
    Sales - Fax 1-418-831-5255
    Sales - Email Contact our Regional Sales Managers to get a quote on a Labrie Enviroquip Truck or help you locate a Distributor near you. 

    Demo Program
    Sales - Phone 1-920.232.7510
    Demos - Email Contact us for more information on our Demos