Expert Manual

The Expert Series

Labrie™ is the leader in the drop frame side loader market. The Expert is one of the most versatile waste collection vehicles available in the industry today. We have been performing our own factory drop frame modifications since 1984.

The Expert Series


The Expert can be used efficiently for manual, semi-automated or fully-automated collection. The hopper can be accessed from both curbside and street side, making collection in alleys and one-way streets quick and productive. With the various configurations and numerous options available, it will be difficult to find an application or solution that we have not already considered!

  •  
    A

    Features

    MANUAL OR SEMI-AUTOMATED COLLECTION

     
    Expert Features
     
  •  
    B

    Specifications

    Expert Helping-Hand

     
     

    BODY DIMENSIONS

    2 axles - 22 yd³ (17 m³)

    3 axles - 31 yd³ (24 m³)

    O.A. length 237 in (6,020 mm) 292 in (7,417 mm)
    O.A. height above frame 103 in (2,616 mm) 103 in (2,616 mm)
    O.A. width* 96 in (2,438 mm) 96 in (2,438 mm)
    Tailgate length 18 in (457 mm) 33 in (838 mm)
    Loading height above frame 5.5 in (140 mm) 5.5 in (140 mm)
    Packer stroke 48 in 48 in
    Packer height 18 in (457 mm) 18 in (457 mm)
    Packer width 71 in (1,803 mm) 71 in (1,803 mm)
    Hopper door width 70 in (1,778 mm) 70 in (1,778 mm)
    Hopper door height 55 in (1,397 mm) 55 in (1,397 mm)
    Dumping angle, body 45° 45°
    Angle of slope, raised 24° 24°
    O.A. length, tailgate raised, body down 292 in (7,417 mm) 332 in (8,433 mm)
    O.A. height tailgate raised, body down, above frame 195 in (4,953 mm) 195 in (4,953 mm)
    O.A. length, dumping position 406 in (10,312 mm) 446 in (11,328 mm)
    O.A. height, dumping position, above frame 201 in (5,105 mm) 228 in (5,791 mm)
     

    BODY SPECIFICATIONS

     

     

    Body floor 3/16" steel CSA G40.21 50W  
    Body bottom side walls 10ga steel A1011 GR 80  
    Body upper side walls 12ga steel A1011 GR 80  
    Body roof 12ga steel A1011 GR 80  
    Body long sills HSS tubing, 6" x 2" x 3/8",
    A500 Grade C
     
         

    BODY CAPACITIES

       
    2-axle chassis 15, 17, 20, 22 & 24 cu.yd. (11.5, 13, 15, 17 & 18 m3)  
    3-axle chassis 27, 29, 31, 33, 35 & 37 cu.yd. (20.5, 22, 24, 25, 27 & 28 m3)  
    Note: no split body available with dual Helping hand
         

    ARM

    STANDARDS 

    OPTIONS

    Pick up capabilities 32 to 96 gal carts  
    Lift capacities 400 lbs at maximum reach  
    Arm reach 84 in 120 in
         

    HYDRAULICS

     

     

    Body Control valve Parker VG35  
    Pump T6D (Manual) / T6DC (Automated)  
    Pump Flow Packer 38 gpm @ 1200 rpm / 20.4 gpm @ 700 rpm  
    Pump Flow Arm N.A. / 16.3 gpm @ 700 rpm  
    Hydraulic reservoir 65 gallons (conventional cab)  
    Hydraulic system pressure 3000 psi (2000 psi on smaller bodies)  
    Return line filter/Nominal filtration  150 gpm, 5 micron  
         

    PRODUCTIVITY DATA

     

     

    Arm cycle time 8 to 20 sec. at 700 rpm  
    Packer cycle time 18 sec. at 700 rpm 13 sec with regen valve option
    Dumping cycle time 55 sec. at 1,500 rpm  
    Tailgate cycle time 55 sec. at idle  
    Grabber  1.5" x 1" x 5"  




  •  
    C

    A CLEANER WAY OF DOING BUSINESS

    CNG Ready since 2001

     
    With the high volatility of diesel prices, fuel choice has never been more important. At Labrie, we believe in greener, safer, smarter and more efficient waste collection vehicles. This is what we have been designing and building for the past 25 years. We deliver the highest-quality, factory–installed compressed natural gas (CNG) solutions that are fully tested at our on-site CNG station. Our manufacturing expertise in CNG is passed along to you with every vehicle. You benefit from a trusted source of expertise when it comes to converting to CNG.

     

     

    THE BENEFITS OF CHOOSING CNG ARE HUGE:

    • AFFORDABLE : Substantially reduced fuel costs when compared to diesel
    • CLEAN: 23% less Greenhouse Gas Emissions compared to diesel fuel
    • FOREIGN FUEL INDEPENDENCE: 98% of fuel supplied from the U.S. and Canada
    • QUIET: 10 decibels more quiet than a diesel truck

    LABRIE CNG SIMPLE, RELIABLE AND PRODUCTIVE

    • Behind the cab design built to hold 4 or 5 CNG tanks, 66 or 81 DGE
    • Low height, integrated body shape, roof mounted design. 4 or 5 tanks, 60 to 75 DGE
    • Premium design having low impact on legal payload

     

    CNG Ready Trucks



     

     

     

     

     

  •  
    D

    Brochure & Media

    Expert Series

     

    For more information on the Expert Series

     

     

    Adobe PDF Download our Product Brochure
    Youtube Visit our Youtube Channel
  •  
    E

    Dealers & Demos

    Call us for more info

     

    Dealers in the US

    Distributors in the US


    In Canada

    Distributors in Canada


    International

    International Distributor;

    General Sales & Demos

    Sales
    Sales - Phone 1-800-463-6638
    Sales - Phone 1-418-831-8250
    Sales - Fax 1-418-831-5255
    Sales - Email Contact our Regional Sales Managers to get a quote on a Labrie Enviroquip Truck or help you locate a Distributor near you. 

    Demo Program
    Sales - Phone 1-920.232.7510
    Demos - Email Contact us for more information on our Demos