|
B
Specifications
Leach™ Alpha-III
BODY DIMENSIONS
|
14 yd³ (11m³)
|
16 yd³ (12m³)
|
18 yd³ (14m³)
|
20 yd³ (15m³)
|
25 yd³ (19m³)
|
29 yd³ (22m³)
|
Body Overall Length |
192" (4,876 mm) |
205" (5,200 mm) |
217" (5,522 mm) |
230" (5,845 mm) |
269" (6,823 mm) |
302" (7,661 mm) |
Cab to Axle |
Refer to Labrie chassis requirements |
After Frame |
Refer to Labrie chassis requirements |
Minimum Requirements |
Refer to Labrie chassis requirements |
Height Above Chassis Frame (Body Roof) |
91" (2,321 mm) |
Height Above Chassis Frame (Body Rear Frame) |
93" (2,369 mm) |
Height Above Chassis Frame (Tailgate Raised) |
160" (4,061 mm) |
Body - Outside Width |
96" (2,440 mm) |
Body - Inside Width |
90" (2,294 mm) |
Hopper Depth |
16" (418 mm) |
Tailgate - Outside Width |
96,4" (2,447 mm) |
Start of Clear CA to Body Front |
Refer to Labrie chassis requirements |
Top of Step Below Chassis Frame |
26" (655 mm) |
Hopper Bottom Below Chassis Frame |
21" (544 mm) |
Hopper Opening Width |
84" (2,133 mm) |
Hopper Opening Height |
62" (1,581 mm) |
Rear of Body to Rear of Tailgate, Closed |
58" (1,470 mm) |
Loading Sill Below Chassis Frame |
5" (127 mm) |
Hopper Capacity |
3,0 yd³ (2,3 m³) |
|
|
BODY SPECIFICATIONS
|
Standards
|
Body Walls |
10 GA |
80,000 psi |
Body Roof |
10 GA |
80,000 psi |
Flanged Floor Plates |
1/4" (6.4 mm) |
50,000 psi |
Floor Through |
5/16" (7.9 mm) |
50,000 psi |
Ejection Face Plate |
3/16" (4.8 mm) |
50,000 psi |
Body Ramp Liners (STD on Light Commercial) |
1/4" (6.4 mm) |
80,000 psi (AR450, 175,000 psi optional) |
|
|
|
RESIDENTIAL SPECIFICATIONS
|
Standards
|
Tailgate Upper Side Walls |
3/16" (4.8 mm) |
50,000 psi (AR450, 175,000 psi optional) |
Tailgate Lower Side Walls |
3/16" (4.8 mm) |
50,000 psi (AR450, 175,000 psi optional) |
Hopper Floor Plate |
3/16" (4.8 mm) |
100,000 psi (AR450, 175,000 psi optional) |
Carrier Face Plate |
3/16" (4.8 mm) |
50,000 psi |
Packer Face Plate |
3/16" (4.8 mm) |
50,000 psi |
|
|
|
LIGHT COMMERCIAL SPECIFICATIONS
|
Standards
|
Tailgate Upper Side Walls |
3/16" (4.8 mm) |
50,000 psi (AR450, 175,000 psi optional) |
Tailgate Lower Side Walls |
1/4" (6.4 mm) |
50,000 psi (AR450, 175,000 psi optional) |
Hopper Floor Plate |
1/4" (6.4 mm) |
100,000 psi (AR450, 175,000 psi optional) |
Carrier Face Plate |
3/16" (4.8 mm) |
50,000 psi |
Packer Face Plate |
3/16" (4.8 mm) |
50,000 psi |
|
|
|
|