Alpha-III

The Leach Alpha-III

The Leach™ Alpha-III allows you to collect more refuse per cubic yard than any other truck. Its diamond-shape ejection panel combined with its curved body technology guarantee loads are evenly distributed and that available volume is fully maximized.

By avoiding refuse pre-compaction in the hopper, we ensure your truck will not require expensive floor repairs. Proven time and time again, anything you throw in this truck, from everyday refuse to big bulky items, the Alpha-III will crush it and put it in its place. Suitable for residential and commercial collection, the Leach Alpha-III offers power and versatility at the same time.


Leach Alpha-III

  •  
    A

    Features

    Leach Alpha-III

     
    Alpha-III Features
     
  •  
    B

    Specifications

    Leach Alpha-III

     
     

    BODY DIMENSIONS

    14 yd³
    (11m³)

    16 yd³
    (12m³)

    18 yd³
    (14m³)

    20 yd³
    (15m³)

    25 yd³
    (19m³)

    29 yd³
    (22m³)

    Body Overall Length 192"
    (4,876 mm)
    205"
    (5,200 mm)
    217"
    (5,522 mm)
    230"
    (5,845 mm)
    269"
    (6,823 mm)
    302"
    (7,661 mm)
    Cab to Axle Refer to Labrie chassis requirements
    After Frame Refer to Labrie chassis requirements
    Minimum Requirements Refer to Labrie chassis requirements
    Height Above Chassis Frame (Body Roof) 91" (2,321 mm)
    Height Above Chassis Frame (Body Rear Frame) 93" (2,369 mm)
    Height Above Chassis Frame (Tailgate Raised) 160" (4,061 mm)
    Body - Outside Width 96" (2,440 mm)
    Body - Inside Width 90" (2,294 mm)
    Hopper Depth 16" (418 mm)
    Tailgate - Outside Width 96,4" (2,447 mm)
    Start of Clear CA to Body Front Refer to Labrie chassis requirements
    Top of Step Below Chassis Frame 26" (655 mm)
    Hopper Bottom Below Chassis Frame 21" (544 mm)
    Hopper Opening Width 84" (2,133 mm)
    Hopper Opening Height 62" (1,581 mm)
    Rear of Body to Rear of Tailgate, Closed 58" (1,470 mm)
    Loading Sill Below Chassis Frame 5" (127 mm)
    Hopper Capacity 3,0 yd³ (2,3 m³)
       

    BODY SPECIFICATIONS

    Standards

    Body Walls 10 GA 80,000 psi
    Body Roof 10 GA 80,000 psi
    Flanged Floor Plates 1/4" (6.4 mm) 50,000 psi
    Floor Through 5/16" (7.9 mm) 50,000 psi
    Ejection Face Plate 3/16" (4.8 mm) 50,000 psi
    Body Ramp Liners (STD on Light Commercial) 1/4" (6.4 mm) 80,000 psi (Hardox 450, 175,000 psi optional)
         

    RESIDENTIAL SPECIFICATIONS

    Standards

    Tailgate Upper Side Walls 3/16" (4.8 mm) 50,000 psi (Hardox 450, 175,000 psi optional)
    Tailgate Lower Side Walls 3/16" (4.8 mm) 50,000 psi (Hardox 450, 175,000 psi optional)
    Hopper Floor Plate 3/16" (4.8 mm) 100,000 psi (Hardox 450, 175,000 psi optional)
    Carrier Face Plate 3/16" (4.8 mm) 50,000 psi
    Packer Face Plate 3/16" (4.8 mm) 50,000 psi
         

    LIGHT COMMERCIAL SPECIFICATIONS

    Standards

    Tailgate Upper Side Walls 3/16" (4.8 mm) 50,000 psi (Hardox 450, 175,000 psi optional)
    Tailgate Lower Side Walls 1/4" (6.4 mm) 50,000 psi (Hardox 450, 175,000 psi optional)
    Hopper Floor Plate 1/4" (6.4 mm) 100,000 psi (Hardox 450, 175,000 psi optional)
    Carrier Face Plate 3/16" (4.8 mm) 50,000 psi
    Packer Face Plate 3/16" (4.8 mm) 50,000 psi
         




  •  
    C

    A CLEANER WAY OF DOING BUSINESS

    CNG Ready since 2001

     
    With the high volatility of diesel prices, fuel choice has never been more important. At Labrie, we believe in greener, safer, smarter and more efficient waste collection vehicles. This is what we have been designing and building for the past 25 years. We deliver the highest-quality, factory–installed compressed natural gas (CNG) solutions that are fully tested at our on-site CNG station. Our manufacturing expertise in CNG is passed along to you with every vehicle. You benefit from a trusted source of expertise when it comes to converting to CNG.

     

     

    THE BENEFITS OF CHOOSING CNG ARE HUGE:

    • AFFORDABLE : Substantially reduced fuel costs when compared to diesel
    • CLEAN: 23% less Greenhouse Gas Emissions compared to diesel fuel
    • FOREIGN FUEL INDEPENDENCE: 98% of fuel supplied from the U.S. and Canada
    • QUIET: 10 decibels more quiet than a diesel truck

    LABRIE CNG SIMPLE, RELIABLE AND PRODUCTIVE

    • Behind the cab design built to hold 4 or 5 CNG tanks, 66 or 81 DGE
    • Low height, integrated body shape, roof mounted design. 4 or 5 tanks, 60 to 75 DGE
    • Premium design having low impact on legal payload

     

    CNG Ready Trucks



     

     

     

     

     

  •  
    D

    Brochure & Media

    Alpha-III

     

    For more information on the Alpha-III Rear Loader

     

     

    Adobe PDF Download our Product Brochure
    Youtube Visit our Youtube Channel
  •  
    E

    Dealers & Demos

    Call us for more info

     

    Dealers in the US

    Distributors in the US


    In Canada

    Distributors in Canada


    International

    International Distributor;

    General Sales & Demos

    Sales
    Sales - Phone 1-800-463-6638
    Sales - Phone 1-418-831-8250
    Sales - Fax 1-418-831-5255
    Sales - Email Contact our Regional Sales Managers to get a quote on a Labrie Enviroquip Truck or help you locate a Distributor near you. 

    Demo Program
    Sales - Phone 1-920.232.7510
    Demos - Email Contact us for more information on our Demos
       
     

Menu.

Home

Our Trucks

If Your Route Is

Our Certified Dealers

Parts & Service

About Labrie

Contact Us

Latest News

Find a Sales Rep

Click to find and contact one of our Sales Representatives.   Find a Sales Rep

Request a Quote

If you wish to request a quote to get pricing on a Labrie, Leach or Wittke truck, please use our Online Quote Request form   Request a Quote

Request Information

Thank you for your interest in Labrie Enviroquip Group Products. For more information, you may complete our Request Information Form.   Request information